Hush - Batten 70
Resilient Flooring Battens


Hush-Batten 70 has been designed as a resilient composite batten that reduces impact sound transmission between separating floors. Hush-Batten 70 allows the construction of a spacious service void and provides long lasting support for floating timber or chipboard floors. Hush-Batten 70 complies with Robust Details FFT1 over concrete and steel and can also be used to significantly improve the performance of timber separating floors within refurbishment projects.

 Benefits
  • A deep batten for use in many situations requiring impact sound insulation between separating floors.
  • Provides a minimum 70mm void as required for RD
  • Improves the reduction of airborne sound transmission
  • Designed to exceed the current Building Regulation requirements of Part E England and Wales), Part H (Scotland) and Part G Northern Ireland).
  • Robust Details FFT1 compliant for floor structures EFC-1, EFC-2 and EFS-1.
  • Comprises 65mm x 45mm planed timber and a 10mm acoustic resilient layer of  Hushfelt ™ factory bonded to the underside.

Test Data

Test data can be supplied upon request.

Product Data

Application
Can be laid over timber or concrete floors
Comprises

65mm x 45mm x 1800mm long double vac treated dressed timber
10mm Hushfelt ™ resilient layer

Overall Batten Dimensions
75mm deep x 45mm wide x 1800mm long
Weight per batten
1.9 kg
Overall nominal depth
75mm
Recommended Centres

450mm using 18mm chipboard/timber flooring
600mm using 22mm chipboard/timber flooring

Robust Standard Details FFT1 over floor structures EFC-1, EFC-2 and EFS-1
Accessories Hush-Seal 20 Perimeter Seal, Hush-RD Flanking Strip Hush-Bond Panel Adhesive, Hush-Grommet Fixing Isolators

Fitting

1. Loose lay the battens, felt side down, in continuous rows at recommended centres. Allow for perimeter battens at the ends of the batten runs. All perimeter battens must be isolated by at least 25mm from the walls.

2. When planning the floor layout leave a 10-15mm expansion gap around all perimeters, fix the flooring to the battens using a generous amount of Hush-Bond Panel Adhesive and secure with ring nails or screws. The fixings must not penetrate the resilient layer to the underside of the battens. At the same time the flooring boards should be glued at all teegee joints board to board.

3. Press Hush-Seal 20 Perimeter Seal into the perimeter expansion gap ensuring that the floor floats freely of the walls maintaining acoustic isolation or use perimeter detail as per Robust Detail instructions using Hush-RD Flanking Strip.

Skirting should be fitted a minimum of three millimeters clear of the floor surface. (PCT only).

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Hush - Batten Resilient Battens are also available in the following depths:

Hush-Batten 55 
65mm deep x 45mm wide x 1800 long planed timber with 10mm Hushfelt ™ resilient layer

Hush-Batten Special Size 
Special sizes can be manufactured upon request.

Product Datasheets

Hush-Batten 70 Datasheet
Hush-Product Brochure