Reflex Bearer - Acoustic Batten for Soundproofing Timber Floors

danskingparkbearer

 


Information

An extensive process of research and development over
many years enabled CMS Danskin Acoustics to produce 
an innovative flooring bearer with an exceptional level of 
acoustic performance. Reflex Bearer Acoustic Battens
comprise softwood timber with  a unique double density
resilient fibre layer which provides a high degree of impact
sound reduction.

 Reflex Bearer Acoustic Battens contribute significantly to 
the reduction of impact and airborne sound on level timber 
or lightweight steel constructions and on concrete subfloors 
in new build and refurbishment applications. The softwood 
timber has either PEFC accreditation as standard or FSC 
on request.


Advantages

  • Most timber, steel and concrete separating floors
  • Robust Detail Separating Floors E-FC-1, E-FC-2, E-FC-7, 
    E-FS-1, E-FT-1, E-FT-2, E-FT-3, E-FS-2
  • Section 5 Example Constructions 1B, 2B, 3A and 3B

 

 

Reflex Bearer Acoustic Battens Cut-Away Diagram

Reflex Bearer Acoustic Battens

Reflex Bearer Acoustic Battens comprise softwood battens 45mm ( Nom.) wide by 2400mm long with a specially developed resilient fibre strip 17mm thick adhered to the underside. They can be preservative treated if required. On average it is expected that the resilient layer will compress by around 4mm under normal loading.

 
Standard Heights ( unloaded ) : 53mm , 62mm and 78mm ( Nom.)
 
Other sizes are available to order. Timber is PEFC certified as standard.
 
For FFT1 requirements use a 78mm Reflex Bearer Acoustic Battens.
For FFT3 requirements use a 53mm Reflex Bearer Acoustic Battens or higher.
 
Performance

Laboratory values for Reflex Bearer Acoustic Battens are shown below.

Please request CMS Danskin Performance Data sheets for test information on the Reflex Bearer Acoustic Battens with different structural floor and ceiling combinations.

CMS Danskin Flanking Strip

This is placed at the perimeter of each floor . The 6mm thick preformed “L” shaped acoustic foam is supplied in strips 1.8m long and packed in bags of 100 lineal metres.The innovative “L” shape makes the flanking strip easy to fit and one size fits all floors. It is lightly trapped between the bottom of the 
skirting and the top of the flooring board with the excess neatly trimmed off.

CMS Danskin Acoustic Quilt ( as required )

Where required to achieve a particular acoustic performance CMS Danskin can supply acoustic quilt
Thickness : 25mm
Density : 19 kg/m2
Roll size : 22.5 metres long x 1.2 metres wide.

Chipboard Flooring


18mm or 22mm thick P5 T&G chipboard flooring with optional protective or decorative layers.
 
Sheet size : 2400 x 600
 

CMS Danskin D3 Adhesive


CMS Danskin D3 adhesive is a high quality resin based wood adhesive which provides a high 
strength impact resistant bond. It conforms to the international standard EN 204 (D3) and BS 4071 
for creep resistance. It is supplied in 1 litre bottles.

Product Datasheets

 Reflex Fixing Instructions (Timber) (201.3kb)
 Reflex Fixing Instructions (Concrete) (179.9kb)
 Reflex Brochure 2011 (249.6kb)
 Scotland Section 5 2010 Guide (1,340.9kb)
 Reflex Health and Safety (161.2kb)