Park Bearer - Acoustic Floor Bearer for Soundproofing Concrete Floors



CMS Danskin Park Bearer Acoustic Floor Bearers are an economical acoustic batten featuring a special closed cell polyethylene foam layer on the underside. They provide effective impact and airborne sound insulation on concrete separating floors The softwood timber has either PEFC accreditation as standard or FSC on request.

  • Approved FFT1 and FFT3 bearer in many concrete Robust Details
  • Effective reduction of impact and airborne sound.
  • Accomodates service runs
  • Eliminates the delays caused by screeds
  • Proven track record
  • PEFC or FSC chain of custody
  • GWP of resilient layer is 0.

    In appropriate overall floor and ceiling constructions the Park Bearer Acoustic  Floor Bearer is suitable for use in:
  • Ground Floors
  • Supporting Hardwood flooring
  • On higher mass concrete separating floors
  • Robust Detail Separating Floor E-FC-1, E-FC-2, E-FC-7, E-FS-1
  • Robust Details Raft Foundation Ground 
    Floors E-FT-1, E-WT-2,E-WT-3,E-WT-4,E-WS-1 and E-WS-4
  • Section 5 Example Constructions 1B and 2B


Park Bearer Acoustic Floor Bearers comprise softwood battens 45mm ( Nom.) wide by 2400mm long with a specially developed resilient foam strip 9mm thick adhered to the underside. They can be preservative treated if required.

Standard Heights : 31mm , 45mm , 50mm , 54mm , 61mm and 70mm.
Other sizes are available to order. Timber is PEFC certified as standard.
For FFT3 requirements use a 50mm Park Bearer Acoustic Floor Bearers or higher.

Laboratory values for Park Bearer Acoustic Floor Bearers are shown below. Please request CMS Danskin Performance Data sheets for test information on the Park Bearer Acoustic Floor Bearers with different structural floor and ceiling combinations.

CMS Danskin Flanking Strip

This is placed at the perimeter of each floor . The 6mm thick preformed “L” shaped acoustic foam is supplied in strips 1.8m long and packed in bags of 100 lineal metres.The innovative “L” shape makes the flanking strip easy to fit and one size fits all floors. It is lightly trapped between the bottom of the 
skirting and the top of the flooring board with the excess neatly trimmed off.

CMS Danskin Acoustic Quilt ( as required )

Where required to achieve a particular acoustic performance CMS Danskin can supply acoustic quilt
Thickness : 25mm
Density : 19 kg/m2
Roll size : 22.5 metres long x 1.2 metres wide.

Chipboard Flooring

18mm or 22mm thick P5 T&G chipboard flooring with optional protective or decorative layers.
Sheet size : 2400 x 600

CMS Danskin D3 Adhesive

CMS Danskin D3 adhesive is a high quality resin based wood adhesive which provides a high 
strength impact resistant bond. It conforms to the international standard EN 204 (D3) and BS 4071 
for creep resistance. It is supplied in 1 litre bottles.

Product Datasheets

 Park Fixing Instructions (181.6kb)
 Park Bearer Brochure (271.8kb)
 Scotland Section 5 2010 Guide (1,340.9kb)
 Park Health and Safety (172.6kb)